Large Taper Wire Cut EDM Machine

LARGE TAPER WIRE EDM MACHINE Our large taper wire cut edm machine have the optional of /-15°,Website:http://www.fhedms.com, /-30°. It has four axis linkage of X,Y,U,V.  Due to the special angle cutting device, it can do the fantastic job. Large taper wire cut edm job is always the trouble for many person, especially the working piece is thick. The following measure is should be taken into consideration during working and programming. 1.Increase the tension of the wire. 2.Using special large diameter molybdenum wire.3.Using special water jet board, which have reasonable design for water flow. Further more, the scrap cleaning is difficult when cutting large angle, so it is necessary to reduce the machine power, increase discharge interval, reduce the height of Z axis. Machine Parameter ModelDK 7740ZDK 7746ZDK 7750ZDK 7755ZDK 7763ZDimension of working table (mm)770x430880x530880x5301070x6001240x660Travel of working table (mm)400x500460x630500x630450x800630x1000Maximum cutting  thickness (mm)400460500550650Machining taper30°  45°30°  45°30°  45°30°  45°30°  45°Maximum load weight350kg450kg500kg800kg1000kgHost weight1300kg1500kg1600kg1800kg2500kgOverall dimensions (mm)1700x1400x17001800×1650×18001800×1650×18001900×2150×21002000×2200×2100
Large Taper Wire Cut EDM Machine