Click image to view full size image
EN 10095 :1999 X9CrNiSiNCe21-11-2 1.4835 Stainless Steel Forging Guidance Ring Rough Machining
Surface Finish:3.2um Ra Or As Required.
Forging Reduction Min:3 Or As Required
Rought machining or Finis Machining
1.4835 Element:
| % | C | Si | Mn | P | S | Cr | Ni | N | Ce |
| Min | 0.05 | 1.40 | 11.50 | 10.0 | 0.12 | 0.03 | |||
| Max | 0.12 | 2.50 | 1.00 | 0.045 | 0.015 | 13.50 | 12.0 | 0.20 | 0.08 |
Heat Treatment:
Solution annealed
Mechanical Properties:
| Thichness a/d mm 1) | Proof strength | Tensile strength Rm Mpa | Elongation after fracture A% Min | Hardness HB max 2) | |
| Rp0.2 Mpa Min | Rp1.0 Mpa Min | ||||
| -160 | 310 | 350 | 650-850 |
40 | 210 |
Certfiticates List:
| Certificates list of Jiangyin Fangyuan | ||
| ISO9001:2008 | ISO14001:2004 | PED Certificate |
| ABS Certficate | BV Certficate | DNV Certificate |
| RINA Certficate | GL Certficate | LR Certficate |
| CCS Certficate | NK Certficate | KR Certficate |
|
More»Our other products Tips：This page [Stainless Steel Forging Guidance Ring Rough Machining EN 10095:1999 Standard] infomation provided by [Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd.] ,the enterprise is responsible for the authenticity, accuracy and validity of the information content. www.tradeleo.com do not assume any guarantee of joint and several liability. A safe way to suggest that the two sides trade, to ensure the interests of both sides.
© 2000-2015 tradeleo.com All Rights Reserved
| Without www.tradeleo.com written permission,Do not copy this site all information works and business information. | ||
