Pressure Sensor

Description:

Pressure Sensor

Technical Features
Pressure sensor element Silicon sensing element,
piezoresistive, stainless steel
membrane, oil filled
Pressure connection Stainless steel,
hermetically welded
Measuring range 0...0.2 bar to 0...50 bar
(-1 bar initial value Relative
pressure is available)
Pressure reference type
IPS 51XX Relative pressure
IPS 61XX Absolute pressure
Output Signal
IPS 5110/6110 4...20 mA, 2 wire system
IPS 5120/6120 0...10 VDC, non-ratiometric
IPS 5125/6125 0...5 VDC, non-ratiometric
IPS 5130/6130 0.5...4.5 VDC, ratiometric
Operating temp. range -40...125 °C
Electrical protection Reverse polarity, short circuit,
Over voltage (IPS 5130/6130)
EMC / ESD Meeting industrial and
automotive standards

Applications
Mechanical Engineering
Hydraulic Controls
Industrial Robots
Environmental and Refrigeration Technologies
Automotive Industry

Pressure Input
Measuring range offset value -1...0 bar (rel.) / 0 bar (abs.)
Meas. range nominal value 0.2...50 bar
Overpressure limit 2x nominal
Burst pressure 3x nominal
Pressure referenze type rel. to atmosphere pressure
(Gage)/Absoute pressure
Mechanical characteristic
Wetted parts Stainless steel
1.4404; 1.4301
Installation torque dep. on pressure connection
(typ. 15 Nm)
Weight approx. 85 g
Mounting orientation all directions

Ambient Conditions
Operation temperature range -40...125 °C
Media temperature range -40...125 °C
Storage temperature range -20...50 °C
Humidity 95 % rH @ 25 °C
Insulation resistance min. 1 M *1)
Protection class (EN 60529) up to IP69K
dep. on design
Vibration (EN 60068-2-64) 10 g rms @ 10...2000 Hz
Shock (EN 60068-2-27) 50 g (11 ms)
100 g (11 ms) IPS 5130/6130
ESD
(EN 61000-4-2) ±8 kV to pins
±15 kV to housing
EMC
IPS 5110/6110
Stripline (EN 61000-4-3) 10 V/m @ 1 MHz...1 GHz
IPS 5120/6120
Stripline (EN 61000-4-3) 20 V/m @ 1 MHz...1 GHz
Burst (EN 61000-4-4) 2 kV
Surge (EN 61000-4-5) 500 V
IPS 5125/6125
Stripeline (EN 61000-4-3) 20 V/m @ 1MHz...1GHz
Burst (EN 61000-4-4) 2 kV
Surge (EN 61000-4-5) 500 V
IPS 5130/5130
BCI
(ISO 11452-4) 200 mA @ 1 MHz...400 MHz
100 mA @ 400 MHz...1 GHz
Stripline (ISO 11452-5) 200 V/m @ 1 MHz...500 MHz