Click image to view full size image
- ARC is much experienced in designing and producing tube assemblies according to customers requirements and international safe standards;
- Every hose is tested in production and after production before shipment;
- We will test our brake hose assembly strictly according to SAE J1401 standard before shipment
Unique feature | Pressure test | No leakage in 2 min under pressure of 19.6±0.48 Mpa |
Volumetric expansion | Less than 1.068cm3/m under 6.9Mpa; less than 1.283cm3/m under 10.3Mpa | |
Burst test | No leakage over 60 Mpa | |
Low temperature | No visible crack without magnification within 72 hr under -55°C | |
Whip test | No damage after 35 hrs rotating at 800rpm | |
Tensile test | No breakage or rupture with 2310 N tensile stress | |
Ozone test | No cracks when examined under 7X magnification under 50 in 50mpa±5mpa | |
Water absorption test | No leakage under 60 Mpa; no damage within 50hr; no breakage or rupture with 2080 N tensile stress |
Hydraulic rubber brake pipe assembly
