Full Set Non dismantle fuel injector cleaner tester tool kit FSC-100 for universal car fuel system c

Full Set Non dismantle fuel injector cleaner tester tool kit FSC-100 for universal car fuel system cleaning

Top Reasons for choosing FSC-100 Gasoline car injector cleaner and tester:

1. Non dismantle type, make injector clean easily

2. Full kit with all adapters for all kinds of cars

3. Necessary tools for a good car repair garage

4. Our test kit include the new ford, land rover adapters, most of other tools do not have these 2 adapters

Description:

FSC-200 Car Fuel System injector Cleaning testing kit can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a non dismantle cleaning tools for MST-A360 Fuel injector cleaner and tester.

Adapters implicated for the following vehicles:

Steps to use the machine:

1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;

2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;

3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;

4. Charge the cleaning fluid into the tank of the cleaner;

5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;

6. Check all connect point to make sure there is not leakage;

7. Start the engine to clean the fuel system.

NOTE:

1. To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

3. The way to identify the inlet and return hose:

1. Generally speaking, inlet hose is bigger, return hose is smaller;

2. There is always a filter connected in the inlet hose side, and a buffer in the return side;

3. There is arrow on the hose to show the fuel flow direction

4. Wear protective glasses before operation . observe the joint whether there is oil leak. if there is, please start to work after remove the fault. as a result of losses caused by human negligence, the user undertakes the responsibility