Click image to view full size image
Full Automatic Non Woven Fabric Machinery For Large Scale Non Woven Fabrics
Description:
Equipment can be slitting rewinding spunlace cloth, wood pulp cloth, non-woven, meltblown, Jakob, spunbond nonwovens and, product cutting neat without burr, the machine for processing with or without mandrel, equipment volume, light box cloth inspection, cutting, counting, winding at the same time, according to customer production require the replacement of various plant configurations. For details, please contact us.
Specification:
| Model No. | QX-R3500 |
| Cutting device | Circular knife cutting |
| Flushing device | Custom punching device |
| Winding mode | Special pneumatic compression device, technology and domestic lead |
| Cutting raw material | spunlace cloth, non-woven, meltblown, Jakob , spunbond nonwovens and can be classified textile materials, such as paper cutting, comes materials and the field test. |
| ontrol program | Stepless speed regulation, PLC programming |
| Use power | imported motor |
| Production speed | Depending on the material |
| Power | 13.5Kw |
| Weight | Specific weight depending on the machine configuration |
Features:
1 Equipment, light box inspection cloth, cutting, counting, winding at the same time.
2 Machine door width 3500 mm, the maximum diameter of 1200 mm.
3 The original cloth is placed in a single cylinder synchronous conveying system, gas - up - shaft, put the roll diameter 350mm and the use of the electroplating light roll.
In the machine speed can be adjusted to 150 m / min (specific according to the characteristic of constant speed), the normal production speed at 60-100 meters / min.
5. Coiling device with the whole exhaust pressure adjusting device, both ends of the linear slide up and down movement, tooth row of parallel positioning coiling roller, gas expansion shaft winding, coiling drum diameter 350mm (which 1 root with wear-resistant roller, 1 piece of plating and).
6 The cutting width can be adjusted in a certain range, the maximum diameter of the product is 1200 mm (1200mm) can be adjusted.
7. The equipment is equipped with 13 high precision aluminum alloy Phytosome and, with blast discharge waste device, stepless speed regulation, slitting and rewinding speed, counting, online cutting air knife 5 sets.
8 Equipment used in the production of Taiwan shear type pneumatic knife, left and right to adjust, adjust the cutting width is convenient and flexible.
9 Machine equipped with a cylinder 6, the whole machine frame are made of 40mm thick steel, which put the roll stand about 1500mm x high 2000mm; check cloth aisle width of about 1500mm, the volume is about 1500mm x high 2000mm.
10 Machine power 13.5KW, electrical uses PLC and touch screen (10 inches), servo system control, which unwinding servo by 5.5kW, winding servo use 7.5kW, servo motor by Taiwan "Xinjie" brand, touch screen with Taiwan "Willen" brand, electrical parts wiring specification is reasonable, safe, clean and easy to operate.
11 Tension control with 100 kg servo tension sensor, and the coil servo equipped with worm gear worm gear box.
12. Machine wall is fixedly connected wi
Full Automatic Non Woven Fabric Machinery For Large Scale Non Woven Fabrics
