Click image to view full size image
Standard Hydraulic Pipe Weld Positioners , Steel Fabrication Rotary Welding Table
Quick Detail:
Positioners provide steel fabrication shops with the most up-to-date equipment for placing bulky fabrications in the ‘downhand’ position in the shortest possible time without the use of cranes and manpower. The positioners tables rotate at accurate and constant variable speeds and tilt through 135° with a high C.G. load rating covering almost all anglers for welding any angular job placed on it. Positioners can be supplied for interfacing with Column and Boom Manipulator.
Description:
The equipment mainly consists of drive rotator, idler rotator and electrical control system etc. Drive rotator
is made up of base, pedestal, rollers and drive device, idler rotator without drive device.
1:pedestal and roller base are welded structure, all the strength of the weld seam according to
requirements such as welding, heat treatment after welding were annealed to remove internal stress and
effective prevention of welding deformation.
2:Drive device located on the two roller beds of the droved rotator, Drive device are consist of reducer
and motor. The reducer adopts the special design gear and wheel reducer and which made by our
company, with high transmission efficiency, large output moment. Drive unit droved by AC frequency
conversion motor, and through reducer, thus drive the roller turning. The turning speed is VFD, and the
speed can be adjusted in the range of 100-1000mm/min, and it can realize different welding requirement
of different size work piece. Both drive and idler rotator equipped with traveling unit, easy for operating,
and the idler unit with manual lock device, it can quick lock rotator on the rail. On the base of drive rotator
equipped with a set of traveling motor, and traveling consists by two bevel gear reducer and two 1.5 KW
motor, gear and wheel couple, and the drive and idler rotator droved on the rail by bevel gear reducer and
gear and rack c
Standard Hydraulic Pipe Weld Positioners , Steel Fabrication Rotary Welding Table
