Click image to view full size image
Description:
ADSS suspensionLong using span
holding strength(10%~20%RTS)
least wear.
low corona charge and electromagnet wear
ADSS suspension
material:aluminum. We can supply aluminum clad steel rod or galvanization steel rod as
customer''s requirements.
Usage | 1, mainly for hanging the ADSS cable. 2, route''s intersection angle no bigger than 30°. |
feature | 1, holding strength:10%~20%RTS. 2, long using span, a good flexibility and ductility , extreme strong fatigue resistance and rot resistance for excellent materials. 3, No rigid contact with cable,least wear. 4, Low corona charge and electromagnet wear because of its soomth appearance. |
composition | 1,inner prefoemed rods 2,outer preformed rods 3,rubber insert 4,suspension splint(shell body). |
Customers can also choose other linking fittings such as clevis, right-angle ring, etc.
without clevis
with clevis
Partial model parameters:
Model | **length of preformed rods | Holding strength (KN) | Failing load (KN) | Span (m) |
Colour code
|
Estimate
weight (kg) | ||||||
Inner L2 (mm) | Outer L1 (mm) | Wind speed 42m/s | Wind speed 35m/s | Wind speed 25m/s |
|
| ||||||
*SHX-AXXXX/003 | 1200 | 900 | 3 | ≥40 | 100 | 150 | 200 | red | 2.5 | |||
SHX-AXXXX/005 | 1650 | 1200 | 5 |
≥55 | 200 | 250 | 300 | red | 3.0 | |||
SHX-AXXXX/007 | 1850 | 1300 | 7 | 300 | 350 | 400 | red | 4.0 | ||||
SHX-AXXXX/009 | 2000 | 1400 | 9 | 400 | 450 | 500 | red | 4.3 | ||||
SHX-AXXXX/011 | 2100 | 1500 | 11 |
≥70 | 500 | 550 | 600 | red | 4.5 | |||
SHX-AXXXX/013 | 2300 | 1600 | 13 | 600 | 700 | 750 | red | 5.2 | ||||
SHX-AXXXX/015 | 2500 | 1800 | 15 | 750 | 800 | 900 | red | 5.5 | ||||
Notes:In the model column, SH represents these are Shihui industry''s products, X represents
suspension armour. A represents these products are for ADSS optical cable. XXXX means cable''s
diameter (unit: mm) ×102, Use "0" ahead when it is less than 4 figures, e.g.: cable''s diameter is
12.85mm then we need to write 1285. Three figures after "/" mean the holding strength of
suspension armour (unit: KN), and use "0" ahead when it is less than 3 figures.
If you use span to mark model, you should change "/" to "" and take a brackets after it then
mark the span in it, e.g.: SHN-AXXXX-(400m). Pay attention to special reminding: if you use span
to mark it you must give the meteorology parameters of the environmental conditions such as the
maximum wind speed, the maximum ice coating, temperature (the maximum and the minimum)
** The length of preformed rods is subject to the practical length of commodities supplied.
chery rubber mount
